Kaynaklı Çelik Boru

Black hollow section Rectangular pipe cold rolled pre galvanized welded square rectangular steel pipe T(mm) 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 10*10 12*12 16*16 19*19 20*20 25*25 30*30 32*32 38*38 40*40 50*50 60*60 63.5*63.5 70*70 75*75 80*80 90*90 100*100 120*120 125*125 150*150 200*200 300*300 350*350 400*400 T(mm) 2.0 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4_6 6_8 8_12 10*10 12*12 16*16 19*19 20*20 25*25 30*30 32*32 38*38 40*40 50*50 60*60 63.5*63.5

Products Description TORICH GB/T24187 BHG1 Precision Single Welded Carbon Steel Coil Tubes for Condenser Standard GB/T24187 Material Q195 Q215 Q235 Q295 Q345 Size WT: 0.5-1.2mm; OD: 3.18-18mm; Length: 1-200m Processing W-H W-C Sureface Bright ,Copper Plated, Galvanized Or Customers'requirements Applications Condenser, evaporator, cooler tube fuel pipe of refrigeration,automobile and electric appliance industrial Test Tension Test, Flaring Test, Flange Test, Reverse Test,

JIS G3452 SGP Welded Carbon Steel Pipes for Ordinary Piping Application for ordinary piping Diameter: 5-420mm, Wall thickness: 0.5-50mm Length: 12mmax Grade: SGP Standard: JISG3452 Black pipe: without zinc coating Galvanized pipe: with zinc coating Produce method:ERW Steel Grade:SGP Relevant standard: KSD3507, ASTMA53, API5L, DIN2440, DIN2441, BS1387, BS3601, JISB0203, JISB0253, JISB2301 Black pipe without zinc coating Galvanized pipe with zinc coating CHEMICAL COMPOSITION

JASO M101 Nylon12 Coating Single Wall Bundy Tube 1. Standard SAE J526 Welded low-carbon tubing EN10305-6 Welded cold drawn tubes from hydraulic and pneumatic power systems ASTM A254 Copper-brazed steel tubing 2. Steel Grade BHG1, SPCC, SPCD, SPCEN, ST14, ST15, ST16, DC04, DC05, DC06 3. Heat Treatment BK or NBK 4. Specification O D/ mm 4 4.2 4.76 6 6.35 7.8 8 9.52 W T 0.5-1.0mm (0.5-0.7mm common WT) Tolerance ±0.05mm Length 180Kg/coil; 700-1000m/coil; per customer’s request 5.

SAE J525 Welded Cold Drawn Low Carbon Steel Tubing Annealed for Bending and Flaring Applications: for Bending and Flaring to Auto Parts Quick Detail: Size range: O.D.:6-350mm W.T.:1-15mm L: According to customer Order Grade: Low Carbon Steel Manufacture and Production: ERW+ DOM The tubing is made from flat-rolled steel shaped into a tubular form, the edges of which are joined and fused together by electric-resistance welding. After forming and welding, the tubing shall be

GB/T 14291 Q235 Welded Steel Tubes For Mine Liquid Service Product Overview GB/T 14291 Q235 welded steel tubes are straight-seam ERW carbon steel tubes specifically designed for mine liquid and auxiliary fluid service applications. These tubes are engineered for use in mine pressured-air lines, drainage systems, gas-drainage lines, and slurry transportation. Manufactured primarily from Q235A/Q235B mild steel, with optional higher-strength grades including Q295 and Q345 for

ASTM A513 DOM 1010 1020 1026 Mechanical Electric Resistance Welded Steel Pipe Product Overview ASTM A513 DOM steel tubing is a precision mechanical tubing product made from electric-resistance-welded carbon steel tube and then cold drawn over a mandrel to improve dimensional accuracy, wall uniformity, surface finish, and mechanical strength. For buyers specifying 1010, 1020, or 1026, ASTM A513 Type 5 is the correct specification to request when the application requires closer

Precision Cold Drawn Cold Sized Tubes Welded Steel Tubes EN10305-3 For Automobile Introduction Precision cold drawn cold sized tubes, also known as welded steel tubes EN10305-3, are widely used in the automobile industry. These tubes are manufactured with utmost precision to meet the demanding requirements of automotive applications. In this article, we will explore the material, specification, chemical composition, mechanical properties, steel grade, and application of these

SAE J525 ERW / DOM Welded Steel Tube Low Carbon Annealed For Automotive Industry SAE J525 ERW/DOM Welded Low-Carbon Annealed Steel Tube for Automotive Hydraulic Lines SAE J525 ERW/DOM welded steel tube is a normalized, cold-drawn, single-wall low-carbon steel pressure tube designed for automotive fluid-line parts requiring bending, flaring, forming, and brazing. It is a practical choice when the drawing requires tight OD/ID control, good concentricity, a smooth surface, and