Paslanmaz çelik boru

2205 Round ASTM A213 25mm Stainless Steel Tube for Chemical Industry Product Discription Producsts Name ASTM A213 Seamless Feritic Austenitic Alloy-Steel Boiler,Superheater, Heat Exhchanger Tubes Technical Standard TP316 TP304 T5 T9 T11 T12 T21 T22 T91 T92 Size Range OD: 3.2-127mm WT: 0.4-12.7mm Length: 6m-12m Cutting Length: according to customers PO. Surface Treatment/Surface Condition Pickling,Blasting,Polishing Tube Inspection Tensile Requirement Hardness Requirement

Heat Exchanger Perforated Round Seamless Duplex Stainless Steel Tube Torich is a manufacturer and trader for Annealed and Pickled Thin Wall Stainless Steel Tubing, with grade TP304/304L, TP316/316L, the products are exported to over 30 countries worldwide. Size:ANSI /ASME size is under,other standard of size is for ready choice O.D.:0.23'to 48'(5.8-1219mm) W.T.:0.04'to 2'(1.0-50.8mm) Length:Max.18 Meter NPS 1/8'-48' Schedule:5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S

ASTM A312 Stainless Steel Seamless Pipe 1 Inch Schedule 40​ Size : O.D.:5-420mm W.T.:0.5-50mm L:max12000mm Production method: ERW Packing: In hexagonal bundles, in wooden boxes, in woven bags, in nude. Type:Stainless QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6. Straighten

ASTM A312 316 14*1 Polished Small Diameter Stainless Steel Pipe Bright annealed stainless steel tubes as per following standard: ASTM A213 ASTM A269 EN10216-5 TC-1 Tolerance:D4/T3 (±0.5%,±0.1 min)/(±10%,±0.2 min) NDT Tests:Eddy Current or Hydraulic Test or UT Heat treatment on tubes: Bright Annealed stainless seamless tube Quality Assurance: ISO 9001&PED 97/23/EC certificated with 100% traceability on all instrument tubes and material test reports(EN 10204/3.1B)accompany

ASTM A312 304 316 Stainless Steel Precision Seamless Stainless Steel Tube Products Description: Precision Seamless Stainless Steel Tube Application: For Chemical Industry, petroleum, electronics, air conditioning Steel Grade/Steel Material: 304, 304L, 316, 316L, 310S, 2205, 2507 Size Range: OD 5-80mm WT 1-10mm Length According to customer requirement Section Shape: Round or Shaped Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth

ASTM A312 316 12×1 Polished Small Diameter Stainless Steel Pipe Introduction: Name ASTM A312 316 12×1 Polished Small Diameter Stainless Steel Pipe Material 304,316,etc OD 0.28-10mm WT 0.08-1mm Technics Seamless Usage Food industry, mediaicl industry, decoration,etc Shape Round 304 capillary is a kind of high alloy steel which can resist corrosion in air or chemical corrosion medium. 304 stainless steel capillary is a kind of steel with beautiful surface and good corrosion

25X1,10X1.5, 10X1mm Super Duplex Stianless Steel Straight Tube Capillary 316 2205 Quick details: Size: 25X1mm 25X2mm 25X3mm 25X1.5mm 10X1mm 10X1.5mm etc. Brand: Torich Product Description: Size: 25X1mm 25X2mm 25X3mm 25X1.5mm 10X1mm 10X1.5mm etc. Steel tube type: Stainless Steel Round Tubes Metal Tube Material:Stainless Steel Super Duplex Stailess Steel. Length: 12Max or as per customer's requests. Samples are available and free. Material Chemical composition: 2205 C ≦0.030 Si

TORICH 304L Stainless Steel Tube for Sputtering Target Size ODxWTxLENGTH 133x4x4113mm Grade:304L Specification: 133*4*4113mm Ellipticity: Roundness deviation≤0.10mm Straightness deviation: Overall length direction≤0.5mm Standard:DIN2462 Tolerance of OD 0.1-0.4mm Tolerance of ID 124.5-125.2mm Tolerance of Length -0/+10mm Special requirements: 1. Quality requirements: Tolerance of OD:0.1-0.4mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+10mm Ellipticity: Roundness

304,316 NICKEL NI STAINLESS STEEL (SS) CYLINDRICAL SPUTTERING TARGET,ROTARY TARGETS Quick detail: Material 304L Specification 132.8-133.5mm Tolerance 132.8-133.5mm Grade:304L Specification: 133*4*4113mm Tolerance of OD:132.8-133.5mm Tolerance of ID:124.5-125.2mm Tolerance of Length:-0/+5mm Ellipticity: Roundness deviation≤0.10mm Straightness deviation: Overall length direction≤0.5mm Standard:DIN2462 Special requirements: Quality requirements: Tolerance of OD:132.8-133.5mm